Most Lower Mainland sundecks sit empty from October to April. The deck isn’t the problem. The rain is. An aluminum deck cover turns that raised platform off your kitchen or living room into space you can use through a wet November, not just the few dry weeks of summer.
Plenty of advice about protecting a deck stops at sealant and stain. That helps the boards, but it does nothing for you standing outside in a steady Surrey drizzle.
Below, we explain what a covered deck is, how solid and glass deck covers differ, what attaching one involves, and why the cover, deck surface and railing work best planned together.
Key Takeaways
- Sealant protects deck boards. Only a roof keeps you, your furniture and the deck surface out of the rain.
- Solid aluminum deck covers give shade and full rain protection, while glass covers keep the daylight Lower Mainland homes are short on in winter.
- Our Big Slope cover has a steeper pitch for faster runoff, with gutters and downspouts carrying water away from the deck and foundation.
- Planning the cover, vinyl deck and railing together means one crew and one guarantee.
Why Does a Sundeck Need a Deck Cover, Not Just Sealant?
Sealants and stains slow water from soaking into wood, and they need reapplying as rain and UV break them down. What they can’t do is stop the rain from landing.
On the West Coast, the wet season runs for months, and a raised sundeck catches everything: rain, fir needles, moss spores. Water sits in the joints and against the wall where the deck meets the house.
A deck cover changes the problem entirely. Rain hits the roof, runs into a gutter and leaves through a downspout. The surface underneath stays mostly dry, and your patio furniture doesn’t need to live under a tarp.
You can step out with a coffee in February without an umbrella. It’s somewhere to barbecue on a rainy Tuesday or sit and watch a storm roll in.
What Is a Covered Deck Called?
The names overlap, which makes shopping confusing. Here’s how they’re generally used:
- Covered deck: Any deck with a permanent roof over part or all of it.
- Deck roof cover or sundeck cover: The roof structure itself. “Sundeck” is the everyday Lower Mainland word for a raised deck off the main floor.
- Patio cover: Technically meant for ground-level patios, but we build the same aluminum systems for decks.
- Pergola: An open-slat frame that gives partial shade. It won’t keep rain off unless a solid or glass roof is added.
- Enclosed sundeck: A covered deck with glass walls, closer to a sunroom or solarium.
Solid Aluminum or Glass: Which Deck Cover Suits Your Home?
The biggest decision is the roof panel, and it comes down to shade versus light.
Solid aluminum blocks sun and rain completely. It suits south- and west-facing sundecks that bake in July. The trade-off is darker rooms behind it, which you’ll notice most on grey winter days.
Glass keeps the rain off while letting daylight through to the deck and into your home. It’s a good fit for north-facing decks or kitchens that already feel dim, though it shows fir needles and pollen more.
Roof shape matters for rain as well. As the name suggests, our Big Slope cover has a steeper pitch, so water runs off faster in a downpour. The General cover is our everyday option, and the Peak Shape cover adds a peaked roofline with a more modern, architectural look. Whichever deck cover you choose, gutters and downspouts carry water away from the deck and your foundation.
What’s Involved in a Covered Deck Attached to the House?
Most sundeck covers attach to the house on one side and sit on posts on the other, so the cover reads as part of the home rather than an add-on. At a high level, the process looks like this:
- We visit, measure the deck and look at the wall where the cover will attach, including siding, windows and the roofline above.
- We design the deck cover around your deck’s size, which way it faces and where the water should drain.
- We confirm permit needs with your municipality before any work starts.
- Our crew installs the posts, beams, roof panels and gutters.
The connection to the house is where experience counts. A poorly sealed attachment can let water in behind your siding.
Cover, Vinyl Deck and Railing: Why One System Works Better
We build patio covers, vinyl decks and railings, so we can plan your whole sundeck as one project instead of coordinating three trades. Our vinyl decking uses a 66 mil (1.65 mm) membrane that complies with CAN/CGSB-37.54-95 requirements. A roof overhead keeps standing water, UV and debris off that membrane, so the surface you walk on wears less.
Railings fit into the same plan. Cover posts and railing posts need to line up, and the railing style changes how the space feels under a roof. Glass keeps your view open, while picket or privacy railings give you more screening from the neighbours.
One crew also means one schedule and one point of contact, backed by our 10-year material and 3-year labour guarantee from the day of completion.
Get a Deck Cover Built for Lower Mainland Rain
A well-planned roof over your sundeck gives you back the months you currently lose to rain. Choose solid aluminum if you want shade, glass if you want light, and a Big Slope roof if runoff is your main concern.
Ready to start? Request a sundeck cover quote, call us at (604) 616-1066 or email info@cwxpatiocovers.com.
Frequently Asked Questions
How do I cover a deck from rain?
The most lasting option is a permanent roof: an aluminum or glass cover attached to the house, with gutters and downspouts to carry water away. Tarps, umbrellas and fabric awnings are better suited to the odd shower than to a full West Coast wet season.
Can you add a deck cover to an existing sundeck?
Yes. Many of the sundeck covers we build go over existing decks. We check the deck and the attachment wall during the site visit, and if the deck surface is worn, we can resurface it with vinyl as part of the same project.
Do I need a permit for a deck cover?
It depends on your municipality and the project. We confirm permit needs with your city before work begins, so you know what’s required up front.








